Swinging Blanket Rod System

hand crafted by artist/blacksmith Richard Klimesh

"Simply the best way to dry and store saddle blankets, sheets, coolers, and winter blankets!" - Cherry Hill

CURRENTLY UNAVAILABLE


mounted on the outside corner of as stall

The Swinging Blanket Rod System enables you to keep all types of blankets, sheets, rugs, pads and coolers clean, dry and accessible. This system takes up minimal space in your barn aisle or tack room.

A vertical STEM bolts to a post or wall.
The RODS slide onto the top of the stem.
A locking CAP stabilizes the top of the stem .

 


mounted on the inside corner of a room

The Swinging Blanket Rod System can be mounted on a flat wall or in a corner.

The RODS are made of 1/2" diameter steel rod and are finished with an extremely durable modified acrylic black paint to prevent rust.

Rods can be made 36" or 42" long.

Each rod uses 6" of vertical space. For example:
a 24" STEM will hold 4 RODS;
a 48" stem will hold 8 RODS.

I will make the STEM the right length to fit the number of RODS you order.

The ends of the RODS are forged into a tapered loop. This design minimizes chance of injury should a person or horse run into the rod and allows you to slip blankets on and off the rods without snagging.

The loops also make a great place to hang small items such as the leg straps that go with a particular blanket or sheet.